|
|
MULTI-LAYER |
| CO-EXTRUSION BLOWN FILM EXTRUDER JC-CX SERIES |
Description
The JC-CX Series Multi-Layer Co-Extrusion Blown Film Extrusion Line has standard 2-layer and 3 layer configuration for applications in packaging and various industrial uses.
Technical data
- Co-Extruding from 45 to 80 mm, 28D to 32D, customer specify size and design is available
- Layer Configuration for Two Layer (A+B), and Three Layer (A+B+A) / (A+B+C)
Standard Equipment
- Central Operator Control Cabinet
- Extruder(s)
- Pivot screen changer, optional hydraulic screen changer
- Die Head & Air Ring
- Film Take Up Unit
- Single Station Automatic Surface Winder
Model |
JC-CX45 |
JC-CX55 |
JC-CX65 |
Screw Diameter (mm) |
Ø 45/50 |
Ø 55/65 |
Ø 65/80 |
Applicable Material |
HD/LD/LLDPE, PP, EVA |
Film Layflat Width (mm) |
800 |
1200 |
1500 |
Film Thickness (Łg) |
15 ~ 200 |
15 ~ 200 |
15 ~ 200 |
Extrusion Output (max. kg/hr) |
80 ~ 150 |
120 ~ 180 |
150 ~ 300 |
Optional Equipment
- Automatic Vacuum Loader
- Dosing System
- Melt Pressure Gauge
- Rotary Die System
- Oscillating Take Up Unit
- Embossing Roller
- Corona Surface Treatment Unit
- Back-to-Back 2nd Station Winder
- Load Cell Tension Control
- E.P.C System
- Hydraulic Unloading Device
- Edge Slitter
- Edge Trim Reclaim Device
- Edge Trim Rewinder
- Motorized Calibration Basket
- Chilling System
Due to our commitment to ongoing technological progress, we reserve the right of technical alternatives without prior notice.
Information given on this website is not binding and shall not become part of a contract. |
|
|
|
