|
|
HDPE / LDPE |
MINI TYPE BLOWN FILM EXTRUDER JC-HM SERIES |
Description
The Mini Type Series Blown Film Extrusion Line built with the philosophy of compactness, cost-effectiveness and maximum efficiency.
Technical data
- Extruder from 35 to 45mm, L/D: 28 (other size available on request)
- Extrusion Output: HDPE 40kg/hr, LDPE 45kg/hr
- Line Speed: 60m/min
Standard Equipment
- Central Operator Control Cabinet
- Extruder
- Pivot screen changer
- Die Head & Air Ring
- Film Take Up Unit
- Single Station Film Winder Unit
Model |
JC-HM35B |
JC-HM45B |
Screw Diameter (mm) |
Ø 35 |
Ø 45 |
Applicable Material |
HDPE/LDPE |
HDPE/LDPE |
Film Layflat Width (mm) |
150 ~ 400 |
200 ~ 500 |
Film Thickness (Łg) |
8 ~ 80 |
8 ~ 80 |
Extrusion Output (max. kg/hr) |
30 |
45 |
Optional Equipment
- Automatic Vacuum Loader
- Dosing System
- Melt Pressure Gauge
- Film Width Balloon Air Control System
- LDPE/LLDPE Die Set & Air Ring
- Slit & Seal Device
- Embossing Roller
- Corona Surface Treatment Unit
Due to our commitment to ongoing technological progress, we reserve the right of technical alternatives without prior notice.
Information given on this website is not binding and shall not become part of a contract. |
|
|
|
